|Factory Pro EVO Shift Star kit|
Leaders in Shift Improvement Tech
6143 401 5000
repl 75034024044 and
6143 402 4000
1090 Adventure 17-19
1190 Adventure 17-19
1290 Super Duke 17-20
1290 Super Adventure 17-20
Special Ceramic Ball bearing kit
(the shift star, ceramic microbearing arm and F-Pro detent spring kit)
(clutch and water pump gaskets not inc)
or call direct
(9-4 Pac time -8 GMT, M-F)
The stock aluminum shift star, stock detent arm and spring
1050 / 1190 / 1290 engines inc 2020
We've been making bikes shift better since 1989 - AFM, AMA, WERA, CCS, AU, UK, DE and OZ orgs, too.
If you were to spot check the current entry field at an AMA Pro event, you'd find that a decent percentage of the bikes that are reputed to "shift well" when they were stock (according the the magazines) are further upgraded with our parts and pieces to further improve shifting to critical performance levels.
Missed shifts - False neutrals between the upper gears.
Quick downshifts cack up and take concentration.
No "feel" in the shifting.
Takes not enough pressure and feels flaccid - or - with "trick mods" takes too much pressure and still doesn't shift quickly.
With this kit, this transmission should complete shifts in 40-45ms instead of 60-65ms.
And miss fewer shifts.
Type of oil used is a 5% difference in shifting.
A shift shaft support arm is a 5% difference in shifting.
The new Factory Pro Shift Star is a 90% improvement in shifting.
In other words, with the Shift Star kit, you can use any oil and have or have not a shift support arm and have awesome shifting.
The 1190/1290 is a high end production engine and needs dedicated, specialized R&D to improve the shifting to competition levels. Even with KTM's gearbox updates, the transmission is, improvable.
The stock KTM and KTM "race" shift star is made of aluminum - not the hardest material and not what we'd want - We use heat treated tool steel for the absolute minimum of rolling resistance and the most secure shifts.
If you have an RC8 or RC8R, tried the "tweaks" and still the shifting is holding back the track performance, Factory Pro is available to help.
Perfect to install when replacing that oil pump gear.
I would like to place an order for 2 more kits.... Would you be able to deliver to Sioux Falls by latest Wednesday (17th of September) night (working there at the moment) as I will return to Europe on Thursday. I understand that this may involve overnight courier at some cost but that is not a problem. I will also call you later today (your office time 09.00AM) to see what is/was possible.
May 24, 2014
So, what difference does
the Factory pro part make? Easier upshifts! Noticeably less drivetrain shunt
when going up the gears. The effort to shift gear is about the same but the
engagement is very different. Obviously it's early days and I'm still getting
used to it but it's all good so far and is a big improvement so I'm very happy
we took the job on
Trackday bike tuning (track only)
The 1290 SDs are variable - some run fairly smoothly and some surge a bit and many are super abrupt on the on / off / barely on throttle operation - kind of like what you don't want in town on a big, strong, torquey bike. Many SD's are not as enjoyable as they could be to ride in town or on a twisty road.
Proper tuning fuel, ignition, crossover tables, device activation tables will smooth out the lowend and improve power delivery linearity to make the bike sweet and nice to ride. (and 'oh darn", will make more peak hp, too :-)
Wheelsmith / Factory uses the EC997 dyno - with Realtime HP and torque readout and a4/ 5 gas Exhaust Analyzer - and that's why results are likely to be better than a dealership level dyno that only "tunes to an air-fuel ratio" (as if there is some magic afr).
I've heard reports in MotorcycleUSA.com that
level dynos can take "120 dyno runs to tune" a KTM. That's abusive to your bike.
It's fine for a magazine test bike, but not yours.
Wheelsmith has been tuning efi KTMs since the first 990's came out - and tuning KTM twins for years in fact, the 950 jetting kit that Factory Pro / Wheelsmith developed is the best performing 950 jet kit available to this very day.
Wheelsmith (Factory Pro's R&D division) is available to tune your trackday SD-
415 491 5920 m-f, 9-4
1290 SD feedback after tuning and test riding
On October 8, 2019 at 1:36 PM daniel hxxxxxxt wrote:
Initial reaction is that is has a little more power! Not to mention that it sounds like a new bike with that intake and proper tune!
Seemed to have more down at the bottom, didn't rev it out too high, yet.
"I want one." Test rider Raul Meono / Wheelsmith Racing
EFI and Carb Tuning - Most all FI and carb tuning
by Wheelsmith Racing
one of the most established flight training facilities in the USA.
Flight Training - train with AMA race winner Todd Harrington.
Get ONLINE realtime quotes from multiple companies - One Stop MC, auto, home and more from insurance companies you know and trust.
The Rich Oliver
Mystery School will help you discover your hidden inner strength.
It will challenge you. It will teach you a new way of thinking, and a new way of riding. You can take your riding to an exciting new level!
We use a variety of proven drills and training techniques.
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.
It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!
Make your next tour Unforgettable, Affordable and Exotic.
Superbike Tours Thailand - See you there.
2013 Flying Special!
Book a sightseeing flight
over the Wine Country or a Kamikaze aerobatic flight or a biplane flight
over Infineon Raceway, the Golden Gate Bridge and the San Francisco
Bay for one or two during the spring and get a free souvenir t shirt!
707 938 2444
Artisan Crafted Fine Cheeses
â€“ Since 1865
Specializing in Handmade Brie & Camembert
|Marin French Cheese Co., also known as The Cheese Factory and Rouge et Noir is not just the oldest cheese manufacturer in the country, but a vacationers and day trippers destination as well as a unique part of American History. Located north of San Francisco, east of Napa County, west of Pt. Reyes and Olema and south of Sonoma County, Marin French has produced hand crafted Artisan soft ripened cheese since 1865. Rouge et Noir cheeses are similar to French and European varieties but reflect the characteristics of Northern California, producing it's own regional style.|
|The extension of the laboratory
for engines of the Swiss Federal Institute of Technology was completed
in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940).
He had a successful career in Berlin but returned to Switzerland after
the advent of the Nazis. His architectural style was somewhat similar
to that of Erich Mendelsohn. The staircase of the laboratory is in normal
use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.