http://www.totalmotorcycle.com/modelhistorytimelines/1997-Honda-GoldWingGL1500SEa.jpg

Gold Wing

GL1500
88-00

 

Ignition Advancer -

RTR-HON-78-04
$99.95

replaces oem #300291-MN5-000

1. Choose your shipping method

2.


 

Ignition Advance

Simply add 4 degrees of ignition advance to your Wing.
 Perks up the low and midrange power if jetted properly and can improve mileage slightly, if jetted properly.
I say "REJETTING REQUIRED" because if your Wing is still delivering a lean fuel mixture (like a new, low mileage bike) it might ping a bit at certain throttle openings at low rpm, especially with low octane fuel . Then you need to richen up the lowend carburetion.

I can't guarantee that it won't ping a bit when hot and I can't guarantee you won't have to richen the jetting a bit - only that this rotor will advance the timing a small amount.

 Thanks - marc

(415) 883-5620

Easy install - 1 hour. 

Pro Shift Arm Kit - fewer missed shifts


Microbearing Shift Arm

pn: SHFT-ARM-H78 / MN5-CER

Hybrid ceramic microbearing detent arm

$89.95


replaces Hon pn: 24430-MN5-000 arm

(415) 883-5620

1. Choose your shipping method

2.

 



Stage 1

Low friction Pro Detent Arm Shift Kit

(w hybrid ceramic bearing)

The F-Pro 52100 steel raced, ceramic balled microbearing equipped detent arm reduces shift drum rotational friction as compared to the steel "roller" version - resulting in quicker shifts and  fewer missed "quick" or "lazy"  shifts.

Help prevent gear dog and shift fork damage caused by missed shifts.

This kit will not fix missed shifts caused by already damaged gears and shift forks.

Thx - Marc
(415) 883-5620

marc@factorypro.com
 



http://images.cmsnl.com/img/products/stopper-compgear_big24430MN5000-01_7e0a.jpg


Special short D type, Honda / Triumph Fuel Screw Wrench 






Shorty
TL-HONDA "D" WRENCH     $29.95


1. Choose your shipping method="1" face="Arial">

2.  

HONDA / TRIUMPH

SHORTY version -  shorty version required for Valkyrie

STEEL CONSTRUCTION Fuel Screw / Mixture Screw Wrench, "D" type

(as used on most modern Honda Keihin CV carbs)

 
   

True Rear Wheel Horsepower by Factory EC997 Eddy Current Dynamometer

 

User report - or "I did it My Way"
(sung with Frank Sinatra voice) -
Thanks for the pics and report, Steve)

Marc, It has been quite some time and weather has just started to cooperate but I have great news. I have been able to make the Valkyrie run real nice!!!
I had removed the top of the air box (some pictures included) and ported out the entire intake system. My final set up is as follows:
 
Pilot jet # 38 (included in the Factory Pro jet kit)
Factory Pro needle: Clip on # 3rd groove (from the top)
Main Jets have an orifice of .072" (thousandths) not sure what size jet that would be? (180, 182, 185 Keihin or  Factory Pro K series main jet, Marc)
Fuel screws @ 2.5 - 2.75 turns
It runs remarkably and pulls well from 1200 rpm in 5th gear.
The sound and acceleration is quite addictive!! It hits the rev limiter in 1st and  2nd before you know it!
It took me 13 tries to jet this setup. Please feel free to pass this combination along to anyone with confidence!
 Thank you for all your help and encouragement!
 
regards Steve Brown
 
 

 

 

 


 



 

 


 



 

 


 



 

 


 



 

 


 



 

 


 



 

 


Steve Brown in his Magic Kingdom.


 



 

 

 


 


 

 

Absolutely NO carb parts sold in California.

New and improved Suzuki Teka SFI  2

with new TPS display and "MMT" Memory Module Tuner

Finally - Quick, easy, cost effective Suzuki tuning with no expensive "add-on boxes"
Suzuki cruisers and sportbikes

Please click here for more info

Contact Factory Pro
M-F, 9am - 5pm, Pacific time, -7 or -8 GMT

800 869-0497
 USA and Canada

415 883-5620

parts information
 info@factorypro.com

EC997 dynamometer information
info@factorypro.com

Product Support /Tech SECTION
click here

 

Mailing / Shipping address:

Factory Pro
101c Roblar Drive
Novato, CA
USA

And most importantly
Restart back at the HOME page and click on the red box in the top left to find the bike that you want parts for...
restart at HOME page

 

This Tuning Site has been visited by
  
people.
www.digits.net - the oldest counting service on the web

          

 

 

 

LINKS
EFI and Carb Tuning - Most all FI and carb tuning

by Wheelsmith Racing

Flight Training - train with AMA race winner Todd Harrington.

The Harringtons own American Flyers, one of the most established flight training facilities in the USA.

 8 locations

 800-362-0808
The Rich Oliver Mystery School will help you discover your hidden inner strength. 
It will challenge you. It will teach you a new way of thinking, and a new way of riding. You can take your riding to an exciting new level!  

We use a variety of proven drills and training techniques. 
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.  

It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!

WW2 vintage flying Special

Book a sightseeing flight over the Wine Country or a Kamikaze aerobatic flight or a biplane flight over famous Sonoma Raceway, the Golden Gate Bridge and the San Francisco Bay for one or two during the spring and get a free souvenir t shirt!
(NEW!  Ask about the P-40 flights!)

707 938 2444

Just tell them that you saw this on the Factory Pro website!
Marc
Northern California's most unforgettable flying experience.  No experience required.  Open weekends!

The extension of the laboratory for engines of the Swiss Federal Institute of Technology was completed in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940). He had a successful career in Berlin but returned to Switzerland after the advent of the Nazis. His architectural style was somewhat similar to that of Erich Mendelsohn. The staircase of the laboratory is in normal use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.