Yamaha XT600, 89-95

**True Rear Wheel HP tm**

Carburetor Recal and air filter Kit


CRB-Y62-1.1-ti   $79.95


International buyers will be billed an additional $18 for shipping

Carb Jetting Kit

Easy to install and tune - no slide drilling.
Adds more low-end / midrange, if the proper main jet is selected, more topend power.
This is one of the kits that we made our reputation on. (Since nobody else made a decent kit)

The XT 600 engine and carbs are used on several different non-Yamaha bikes and people generally buy this kit and start jetting from there.

TECH on the TK carb set

 

 

BELOW
 is for people jetting the XT550, SRX660 or other bikes, like the MZ that used this carb set. If you are jetting an XT600, it's just to look at, you have all the parts you need in the above Y62 kit.

NOTE to XT550 and SRX660 and other similar engined bike owners:
People have told us that they used our Y62 kit to start to jet the carbs. The carbs and bikes are similar and that's about all we know.
If you can't find a dedicated carb kit, then this kit might be a place to start.

 
XT550 carb shots

Bellmouth view

Left side is the "slide carb". Right side the "CV" carb side
Off the float bowl, the brass spigot pointing horizontally. There's usually a black rubber hose that joins the horizontal spigot to the vertical spigot, just to the right and above.
That "vertical spigot" is actually a special "main jet".

left  side view
engine side view

The CV carb bore is aprox.30.5mm

The slide carb is oval (ish).
It's 29mm high and 24mm at widest.
It's really 2  24mm diameter bores, slightly "constricted in the middle" to about 23.5mm in the center.
 
RH view
float bowl view.

Sorry, I couldn't tell what the original float height was. This carb set had been bounced around for years.
It might be one of those carbs where the float holder ends up parallel to the gasket surface.
 

The Slide carb uses a jet that is interchangeable with a "393" Series Keihin main jet.
Float height setting, from Yamaha service manual - Thanks to Thomas Ross, Riverside, CA
click on pic to left for full size
This is the RH CV carb's TK "main jet".
I didn't make these and don't know where to get them.

If for some reason, you feel the need to change the main on the RH carb, you either have to enlarge the metering orifice, or, sneakier and easier -
Enlarge the existing hole larger than the jet you think that you might end up using (decreasing flow restriction) an dthen, for metering, insert a 393 series Keihin jet (or similar) into the rubber hose.
 
This is a base view of the RH carb's TK main jet.
It's a #130.
The TK pilot jet.

It's was tough to read, but it looked like a "18" oh "48"or something like that.

I know nothing in Mikuni or Keihin that will interchange, so it's drill or solder and drill if you have to change it.
If you find an interchangeable jet, and want to share, email me - email here

Thanks,

Marc
   

 

 

 

 

 

 

 

 

Absolutely NO carb parts sold in California.

New and improved
Suzuki Teka SFI 2
with new TPS display and "MMT" Memory Module Tuner feature

Finally - Quick, easy, cost effective Suzuki tuning with no expensive "add-on boxes"
Suzuki cruisers and sportbikes

Please click here for more info

Contact Factory Pro
M-F, 9am - 5pm, Pacific time, -7 or -8 GMT

800 869-0497
 USA and Canada

415 883-5620

no fax

Factory Pro
101c Roblar Drive
Novato, CA
USA

If it's
4pm at Factory Pro it's 9am in eastern Australia.

parts information
 info@factorypro.com

EC997 dynamometer information
 info@factorypro.com

Product Support /Tech SECTION
 click here

And most importantly
Restart back at the HOME page and click on the red box in the top left to find the bike that you want parts for...

 restart at HOME page

 

This Tuning Site has been visited by
  
people.
www.digits.net - the oldest counting service on the web
Clock widget          

 
 

LINKS

The below links are people and companies that are consistently impressive with their continual uniqueness and dedication to providing traditionally valued, quality products and services.
Marc
  

Flight Training - train with AMA race winner Todd Harrington.

The Harringtons own American Flyers, one of the most established flight training facilities in the USA - 8 locations -
 800-362-0808


Train to Win		 The Rich Oliver Mystery School will help you discover your hidden inner strength. 
It will challenge you. It will teach you a new way of thinking and a new way of riding. You can take your riding to an exciting new level!  

We use a variety of proven drills and training techniques. 
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.  

It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!

WW2 vintage flying Special

Book a sightseeing flight over the Wine Country or a Kamikaze aerobatic flight or a biplane flight over famous Sonoma Raceway, the Golden Gate Bridge and the San Francisco Bay for one or two during the spring and get a free souvenir t shirt!
NEW!  Ask about the P-40 and P-51 flights!

707 938 2444
Just tell them that you saw this on the Factory Pro website!
Marc
Northern California's most unforgettable flying experience.  No experience required.  Open weekends! Call ahead in the winter.
Make your next tour Unforgettable,  Affordable and Exotic.
Superbike Tours Thailand - See you there.

Geoff@superbiketoursthailand.com		 Supwebike Tours Thailand
The extension of the laboratory for engines of the Swiss Federal Institute of Technology was completed in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940). He had a successful career in Berlin but returned to Switzerland after the advent of the Nazis. His architectural style was somewhat similar to that of Erich Mendelsohn. The staircase of the laboratory is in normal use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.
 

Artisan Crafted Fine Cheeses – Since 1865   -    Specializing in Handmade Brie & Camembert
Marin French Cheese Co., also known as The Cheese Factory and Rouge et Noir is not just the oldest cheese manufacturer in the country, but a vacationers and day trippers destination as well as a unique part of American History. Located north of San Francisco, east of Napa County, west of Pt. Reyes and Olema and south of Sonoma County, Marin French has produced hand crafted Artisan soft ripened cheese since 1865. Rouge et Noir cheeses are similar to French and European varieties but reflect the characteristics of Northern California, producing it's own regional style.