CB700SC  Nighthawk
84-86 only

Factory Pro Series "H02"

One of the nicest standard 700's ever made. Clean styling and very smooth - a good bike is starting to pick up value as a collectors item!

 

Item Description
4 screw set


(sample pic above)


(sample pic)

Long Boy Fuel Screw Kit

pn: CRZ-SCR-3020m1-ME5/KR3
replaces
16016-ME5-671
16016-KR3-671

 $89.95 4 screw kit
 with 4 new screws, springs, washers and o-rings

1. Choose your shipping method

2.

Finger AND Screwdriver adjustable extended Fuel Screws

Frustrated with trying to find an "almost 90 degree"  screwdriver to fine adjust your fuel screws for best idle and cruise?
Use Factory Pro's new "finger adjustable" fuel screws to adjust fuel screws for best throttle response. Traveling to high altitude? It's easy to lean out the lowend temporarily.

Make your life easier.

Installation:
Remove old short stock fuel screws, old o-rings, old washers and old spring. The o-ring might be stuck in the carb, so, take a light and make sure it's really out if it didn't come out with the screw (or you can't find it after you took out the screw)
Use a small bent wire to pull it out if it doesn't drop out. Keep the old parts for "spares".

CRB-H02-1.0  $139.95

1. Choose your shipping method
 
2.
 


Standard drop-in carb kit

Adds more low-end / midrange, if the proper main jet is selected, more top-end power. Celmat 30 needle material.  Easy to install and tune - no slide drilling.
Works better than any other carb kit.


CRB-H02-3.0  $149.95
1. Choose your shipping method

2.

Adds more low-end / midrange, if the proper main jet is selected, more top-end power. Celmat 30 needle material.  Easy to install and tune - no slide drilling.  This kit gives more power everywhere, due to its use of individual pod filters.
Works better than any other carb kit.

SHFT-PRO-HON-6-cb700sc   $149.95

"Legacy kit"
allow 2-3 weeks extra time.

microbearing detent arm,
F-Pro Shift Spring and a 11394-MW3-600/601 shift cover gasket

(replaces 24430-MJ0-000 arm and 24435-MJ0-000 spring)

1. Choose your shipping method
 
2.
 

The famous  "arm and a spring and a  gasket" PRO SHIFT kit

Greatly improve  clunky stock shifting - especially 30 year old stock clunky shifting!

Includes the Factory Pro Microbearing Detent Arm and Factory Pro shift spring and a new shift cover gasket.

Makes shifting EASIER and MUCH quicker and virtually eliminate missed shifts. Helps that 1-2 shift.

Shifts more consistently and helps prevent missed shifts (which damage shift forks and engagement dogs)

Installation
1-2 hours, Must remove and replace the chain and engine sprocket to install.

This is the same type of kit that Yamaha Racing has used. and Yoshimura.... and Erion..... and Two Brothers...... and Honda....... and Kawasaki........

Nighthawk 750 INSTALLATION INSTRUCTIONS - CLICK HERE

 

SHFT-HON-6-cb700sc   $59.95

F-Pro Shift Spring and a 11394-MW3-600/601 shift cover gasket.

(replaces  24435-MJ0-000 spring)

 

1. Choose your shipping method
 
2.
 

The famous  "spring and a  gasket" kit

Make shifting MUCH quicker and virtually eliminate missed shifts. Helps that 1-2 shift.

Shifts more consistently and helps prevent missed shift (which damage shift forks and engagement dogs)

Installation
1-2 hours, Must remove and replace the chain and engine sprocket to install.

This is the same type of kit that Yamaha Racing has used. Ohh.... and Yoshimura.... and Erion..... and Two Brothers...... and Honda....... and Kawasaki........

 

Nighthawk 750 INSTALLATION INSTRUCTIONS - CLICK HERE

 

Links

Suggest them and I'll put a link up!

 

Absolutely NO carb parts sold in California.

New and improved Suzuki Teka SFI  2

with new TPS display and "MMT" Memory Module Tuner

Finally - Quick, easy, cost effective Suzuki tuning with no expensive "add-on boxes"
Suzuki cruisers and sportbikes

Please click here for more info

Contact Factory Pro
M-F, 9am - 5pm, Pacific time, -7 or -8 GMT

800 869-0497
 USA and Canada

415 883-5620

parts information
 info@factorypro.com

EC997 dynamometer information
info@factorypro.com

Product Support /Tech SECTION
click here

 

Mailing / Shipping address:

Factory Pro
101c Roblar Drive
Novato, CA
USA

And most importantly
Restart back at the HOME page and click on the red box in the top left to find the bike that you want parts for...
restart at HOME page

 

This Tuning Site has been visited by
  
people.
www.digits.net - the oldest counting service on the web

          

 

 

 

LINKS
EFI and Carb Tuning - Most all FI and carb tuning

by Wheelsmith Racing

Flight Training - train with AMA race winner Todd Harrington.

The Harringtons own American Flyers, one of the most established flight training facilities in the USA.

 8 locations

 800-362-0808
The Rich Oliver Mystery School will help you discover your hidden inner strength. 
It will challenge you. It will teach you a new way of thinking, and a new way of riding. You can take your riding to an exciting new level!  

We use a variety of proven drills and training techniques. 
Practicing these techniques with our Yamaha dirt track trainers will enhance your abilities both on the track or the street.  

It doesn't matter what you ride or race, the Rich Oliver Mystery School improves everyone's skill level and mindset!

WW2 vintage flying Special

Book a sightseeing flight over the Wine Country or a Kamikaze aerobatic flight or a biplane flight over famous Sonoma Raceway, the Golden Gate Bridge and the San Francisco Bay for one or two during the spring and get a free souvenir t shirt!
(NEW!  Ask about the P-40 flights!)

707 938 2444

Just tell them that you saw this on the Factory Pro website!
Marc
Northern California's most unforgettable flying experience.  No experience required.  Open weekends!

The extension of the laboratory for engines of the Swiss Federal Institute of Technology was completed in about 1935. Its architect was Rudolf Otto Salvisberg (1882-1940). He had a successful career in Berlin but returned to Switzerland after the advent of the Nazis. His architectural style was somewhat similar to that of Erich Mendelsohn. The staircase of the laboratory is in normal use but well preserved.
Edited to the tunes of Chemical Residue by Herbie Hancock.